Taking A Pool Table Apart for Hauling

Taking A Pool Table Apart for Hauling | Best Moves in Canada
Taking A Pool Table Apart for Hauling | Best Moves in Canada

A pool table is one of the coolest inclusions in a home since it serves the purpose of entertainment as well as aesthetic pleasure. However, even with such significant advantages, it does present the problem of being cumbersome to haul from not only one house to another but even one room to another due to its weight and size. Because of this nature, it is highly recommended to take apart the item and have it hauled in pieces. That way, the risk of damage is highly mitigated and also makes it easier for the people involved to get the job done. Movers in Canada provide some pointers on how to carry out the procedure.

Collect Disassembly Equipment

Before the table can start coming apart, you need to make sure you have everything that is required to get the job done. You do not want to be halfway through only to realize you lack Ziploc bags to place tiny bolts or a screwdriver to pull them out in the first place. Some of the necessities demanded by the job include labeling pens, staple remover, flat-head drill, sheets, plastic wrap, and Ziploc bags, among others.

Pull Out Pocket Liners

These elements are common in most pool tables and should be the first to come out. Take out the screws or staples used to secure them in place using either a staple remover or screwdriver. The small pieces should be placed in a small bag and properly labeled to avoid getting lost.

Proceed to Rail Bolts

The rail bolts can be pulled out after the pocket liners have come off, which can be done by lying beneath the table and using a socket wrench. In most cases, these elements are attached using three bolts each, which means you should have eighteen of them at the end of the procedure. With help, flip over the rail system and proceed to work on the corner miters.

Detach the Corner Miters

At the corners of the flipped table lies two casting miters that can be detached using a flat-head screwdriver. Once the screws and brackets are out, ensure you place them in a labeled Ziploc bag.

Pull Out the Aprons

The aprons easily fall out once the screws have been removed. It is vital to keep your hand on the item when removing the last bolt so that it does not fall off once it is detached from the table. The article can then be stored using a blanket and plastic wrap while the hardware used to hold it in place goes into a sealed bag.

Take Out the Rails

The rails can easily be pulled out once the pocket castings have been removed. These items are held in place by twelve nuts, which should be stored in a bag once removed. The rails can then be lifted and wrapped with three of them going into one blanket or sheet. Plastic wrap can be used to secure the ends.

Work on the Felt

This element is among the most difficult to work on as it faces the risk of a lot of damage if not handled carefully. Each staple used to hold it in place should be removed slowly while a magnetic bowl is used to collect them to avoid injuring anyone involved in the process. If the glue is used in the place of staples, pull it out neatly from one corner to prevent creases. Once it is out, store it in a plastic bag.

Unfasten the Slate Pieces

Each slate piece is held in place by four screws that can be pulled out using a drill. Each slate should be labeled according to the place it has been pulled out so that the assembly process can be conducted in good order. Lifting out each slate will require the help of a friend or two, considering they weigh about two hundred and fifty pounds. Once they are out of the way, the rest of the frame can be taken apart with each piece being placed in a blanket of its own.

Taking apart a pool table can be challenging, which is why it is best to leave the task to professional cross Canada moving service to ensure your safety and that of your table.

We recommend you to read “Conducting a Business Haul” and “Coping with Reentry Culture Shock”.